Commercial refrigerators are important components of the food and retail industry, and when they are damaged or when they stop operating, it could cost the business a hefty amount of money due to lost stock. Here are the three common reasons why commercial refrigerators get damaged.
Faulty door seals
Commercial refrigeration units need gaskets or rubber seals to make sure that no air can enter the unit. The smallest crack in the rubber can create a leak, which then releases the refrigerated air, and it causes the refrigerator unit to work harder to maintain a constant temperature.
Gasket damage can waste energy, and it allows the growth of bacteria which could eventually lead to contamination. It is highly recommended to check your refrigeration units for seal damage at least once a month, and if you are not sure what you should be looking for, you can call your local service provider.
A lot of local service providers, including commercial refrigeration repair in Phoenix, can help assist you with maintenance and repair. If your unit is well-maintained, you can prevent any damage from getting bigger, thus saving you a lot of money.
Power trips
When a business loses power, it could cause damage to the refrigerator’s compressors and other components. If you are not able to avoid the switching off and on again of your refrigerators through the use of an alternative power source, it is highly recommended that you unplug your refrigerators immediately from the wall sockets and leave them unplugged for at least 15 minutes, even if the power was cut for just a minute or two.
Another leading cause of peril to refrigerators is a high voltage surge. When there is an increase in voltage from a power surge, it causes a rush of electrical current within the unit. The surge then generates an excessive amount of heat, and it can damage a lot of parts of the refrigerator. The three components in particular that are often damaged by high voltage surge are the compressor, the control board, and the ice maker.
The control board is considered as the most sensitive electrical component in commercial refrigerators. They are easily damaged when a surge of electrical current creates excessive heat. Refrigerators with a damaged control board can be repaired because the board is relatively inexpensive, and they are easy to replace.
Even though the damage is less severe for compressors, it can still be damaged due to the high voltage surge. A strong electrical event can damage the windings that give the start and run functions of the compressor, and it causes premature compressor failure. Because of the high cost of replacing the compressor, the refrigerator often needs replacement if the compressor is damaged.
A voltage surge can also damage the ice maker. When the rush of current causes additional heat in the component, it can lead to a short in the ice maker’s connections. The ice maker assembly is inexpensive to replace, and given the parts that are available, a unit with this type of damage can be repaired.
Ventilation Space
Experts understand what the food and retail industry is like. In order to manufacture effective refrigeration solutions that operate in the retail context. One issue on this from time to time is underventilation, which often leads to damage. This is because the refrigeration units overheat and electronic components end up malfunctioning within.
While commercial refrigerators are made to be packed next to each other, be mindful of how much space you are leaving where your units’ ventilation slots are placed. This will have a lot to do with your climatic context, as well as whether or not you have air conditioning.